You are here: Home / News / Industry News / High Efficiency Centrifugal Slurry Sand Pump Horizontal Slurry Pump

High Efficiency Centrifugal Slurry Sand Pump Horizontal Slurry Pump

Views:8     Author:Site Editor     Publish Time: 2019-10-22      Origin:Site

High Efficiency Centrifugal Slurry Sand Pump Horizontal Slurry Pump 

Product Introduction:

Type AH(R)/HH/M(R) slurry pumps are cantilevered,horizontal and centrifugal slurry pumps. 

Mud pumps, impurity pumps, dredge pumps and desilting pumps all belong to category of slurry pumps.

Type AH(R)/HH are heavy duty slurry pumps used to transport the strong abrasive high density or low density high head slurry. Under the allowable pressure, they can be installed in multistage series.

Type M(R) slurry pumps are middle duty slurry pumps used to transport the fine particle size and middle density slurry.we are coal mine slurry pump supplies,we can guarantee quality.

What data should I choose for the pump?

1.Note that the type and performance of the selected pump meet the requirements of process parameters such as flow, head, pressure, temperature, cavitation flow, and suction.

2,must meet the requirements of the media characteristics.

For pumps that transport flammable, explosive, toxic or valuable media, shaft seals are required to be reliable or leak-free pumps, such as magnetic drive pumps, diaphragm pumps, and shield pumps; for pumps that transport corrosive media, corrosion resistance is required for convection components. Materials, such as AFB stainless steel corrosion-resistant pumps, CQF engineering plastics magnetic drive pumps; for pumps containing solid particulate media, the convection components are required to use wear-resistant materials, if necessary, the shaft seals are washed with a clean liquid.

3.High mechanical reliability, low noise and low vibration.

4.The economic consideration should be based on the lower total cost of equipment, operating, maintenance and management fees.

5.The centrifugal pump has the characteristics of high speed, small volume, light weight, high efficiency, large flow, simple structure, no pulsation of infusion, stable performance, easy operation and convenient maintenance.

Therefore, in addition to the following conditions, the centrifugal pump should be used as much as possible:

1. When there is a measurement requirement, the metering pump is selected.

2, the head requirements are very high, the flow is very small and there is no suitable small flow high-lift centrifugal pump can be used, optional reciprocating pump, such as cavitation requirements 2, not high can also choose vortex pump.

3, the head is very low, when the flow is very large, the axial flow pump and the mixed flow pump can be selected.

I.Action plan

1.Honest cooperation: We uphold the relationship of trust and responsible cooperation.

2,innovation and excellence: we pursue innovation that is valuable to the company and customers, and strive for excellence.

3,customer orientation: We insist on rapid response to meet customer needs.we are coal mine slurry pump supplies,we can guarantee quality.

Second, the code of conduct

1,we continue to learn and enterprising, resolutely put an end to inaction, love to fight and win.

2.We insist on personal interests to obey the overall interests, and individual honors obey the group honors.

3.We encourage courage to take responsibility, actively cooperate, help each other, and grow together.

4.We are close to the market, tap customer needs, respond quickly, and never delay.

5.We ensure product quality and high added value, and let customers use it in the first time.

6.We capture innovative breakthroughs in every detail of our work and continue to improve.

7.Our real job is to think about problems, ask questions, and solve problems.

8,we must do everything in place, do not make excuses, do not push, do not slap, resolutely popular.

9,we save a drop of water, electricity, one liter of oil, one grain.

coal mine slurry pump supplies


Recommended Products

  • Main Specifications: Size: 1-30 inches Capacity: 25-13860 m3/h Head: 5-60m,we are LAP low abrisive slurry pump manufacturer,we can guarantee quality. Material: Hi-chromium metal liner, or Rubber liner Seal: Packing seal, Expeller seal
  • Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.
  • Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;
  • Working Applications: Series HHD slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump. Designed for handling strong abrasive and high concentration slurries, HHD series slurry pumps are cantilevered heavy duty slurry pumps with metal liner. With thick wear parts and heavy-duty support, HHD series could run in series in the allowable range of pump working pressure.
  • 1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;
  • Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal
  • Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.
  • Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

  Mrs. Mary Jiang
   +86-15832141720

  +86-311-86930351

  gkjxmy@163.com
  549801490
  mary232526

 

Copyright  2019 Hebei State Owned Holding Machinery Trading Co., Ltd. All Rights Reserved

SEND MESSAGE