You are here: Home / News / Industry News / How to reduce the energy consumption of the slurry pump

How to reduce the energy consumption of the slurry pump

Views:7     Author:Site Editor     Publish Time: 2019-09-19      Origin:Site

How to reduce the energy consumption of the slurry pump

The slurry pump has the advantages of simple structure, high efficiency, low noise, safe and reliable operation, convenient installation and maintenance. It is suitable for extraction from the ocean, and can also be used for river, reservoir, canal extraction, etc. It is mainly used for farmland irrigation and plateau mountainous areas. The water for humans and animals can also be used for water supply and drainage in cities, factories, railways, mines and construction sites. How to reduce energy consumption when using it? Let us know:

1,the seal ring gap increases

According to the test, when the gap in the radial direction of the impeller increases by 4 mm, the pumping water volume will be reduced by 10%. During the inspection, only the organic adhesive plus asbestos wire should be used to restore the factory-specified clearance, so that the pump can consume fuel or electricity during operation. The cost is reduced by 10%-12%.

2.The inner surface of the pump surface and the pressurized water chamber (also known as the volute) is rusted.we are China slurry pump manufacturer,we can guarantee quality.

Surface rust and unevenness will reduce the pumping water by 7%-8%; only need to use steel brush and iron sandpaper or grinding wheel to smooth the repair, it can reduce the fuel consumption or power consumption during operation by 9%-14%.

3.The axis of the pressurized water chamber and the impeller do not coincide

When the pressure water chamber is offset from the axis of the impeller by 2 mm or the yaw angle is greater than 2 degrees, the pumping water volume will be reduced by 5%-6%; only careful measurement during maintenance and careful positioning of the axis coincident position can be used to make the pump The oil or electricity consumption during work is reduced by 6%-7%.

Reducing the energy consumption of the slurry pump is something that every one of us wants to know, which saves resources and reduces costs for ourselves, which is very helpful for every business.

Our business policy is: to survive by quality, to develop by products, to cooperate with credit and to win customers with service.

The company abides by the contractual commitment to product quality and various services, and is willing to cooperate with new and old customers to create a better future.

Company spirit: Innovation is the eternal theme, and transcendence is the unremitting pursuit.

Company purpose: credit guarantee, integrity-based.

We will serve the new and old customers with reasonable price, good reputation, strong strength, high quality products and most considerate service!we are China slurry pump manufacturer,we can guarantee quality.


Recommended Products

  • Main Specifications: Size: 1-30 inches Capacity: 25-13860 m3/h Head: 5-60m,we are LAP low abrisive slurry pump manufacturer,we can guarantee quality. Material: Hi-chromium metal liner, or Rubber liner Seal: Packing seal, Expeller seal
  • Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.
  • Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;
  • Working Applications: Series HHD slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump. Designed for handling strong abrasive and high concentration slurries, HHD series slurry pumps are cantilevered heavy duty slurry pumps with metal liner. With thick wear parts and heavy-duty support, HHD series could run in series in the allowable range of pump working pressure.
  • 1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;
  • Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal
  • Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.
  • Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

  Mrs. Mary Jiang
   +86-15832141720

  +86-311-86930351

  gkjxmy@163.com
  549801490
  mary232526

 

Copyright  2019 Hebei State Owned Holding Machinery Trading Co., Ltd. All Rights Reserved

SEND MESSAGE