Views:2 Author:Site Editor Publish Time: 2019-10-12 Origin:Site
Reduce the wear of the slurry pump
First, the design method should conform to relevant theories
In the water conservancy design, since the pump conveys a mixture of solid and liquid, the design of the two solid-liquid mixture should be considered in design, and the two-phase flow theory is adopted for design.
At the same time, reference should be made to the new scientific research and theory to make the movement of the body at the flow component and the slurry more similar, so as to reduce the impact and friction of the solid particles on the slurry pump, thereby reducing wear.we are provide coal mine slurry pump for sale,We can guarantee quality.
Second, improve the structure
Taking reasonable parameters and designing the structure, the selection of the diameter D of the blade inlet has a great influence on the wear capacity and efficiency. For the parts that are easy to wear in the slurry pump, in addition to the improvement in the theoretical design, the structure should be improved. The parts should be made as replaceable parts as possible, and should be better considered when designing the structure. It is convenient to replace this item.
Third, do daily maintenance work, such as:
(1)Keep the equipment clean, dry, free from oil and leaks.
(2)Check whether the running sound of the pump is normal, whether there is vibration or leakage, etc., and find problems in time.
(3)Check the oil level in the bracket every day. The correct oil level is near the oil line position and should not exceed ±2mm.
(4)It is strictly forbidden to work in the state where the slurry in the pool is evacuated, because the slurry pump works not only with vibration but also affects the life of the pump.
(5)Each pump is marked with the size of the largest solid particles allowed to pass, and it is strictly forbidden to enter the metal object and the large solid particles that exceed the pump's permission. Moreover, it is strictly forbidden to enter flexible materials such as rubber, cotton yarn and plastic in the pump to avoid damage to the flow parts and block the impeller and flow passage, resulting in the pump not working properly.
(6) Always check the pressure and flow rate of the shaft seal water and cooling water. It is possible to check the opening degree of the shaft sealing water valve or the method of detecting the temperature of the stuffing box. When the temperature is high, the water supply amount is insufficient. For pumps with grease-lubricated packing, the oil should be refilled 1-2 times a day to ensure that the slurry pump is in good lubrication.
We have a high-quality marketing team that unites and cooperates and develops with courage. We operate with excellent service, flexible and effective way, adhering to the business philosophy of "survive by strength, develop by reputation", with "integrity management, mutual benefit and common development". "As a principle, we are willing to provide more excellent and more professional services for the new and old customers, and create a better tomorrow. Welcome customers to come and negotiate business!we are provide coal mine slurry pump for sale,We can guarantee quality.