Mine: Black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying
Metallurgy: Transport various slurry for aluminium or steel manufacture
Coal: Coal mining, washing and various coarse and fine coal slurry transportation
Electricity: Remove power plant ash, wash ash, various ash dregs or ash slurry transportation
Construction materials: Various mud sand slurry(such as Cement slurry) transportation
Chemical: Phosphatic fertilizer or potassic fertilizer factory various abrasive slurry transportation
Water conservancy: Lake, river dredge, sediment, grit, High plastic clay Suction line to transportation.
Two types of slurry pump seal
Two types of slurry pump seal have always been a problem for researchers to explore hard With the level of industrial production Impurity pump use is also expanding.Due to the particularity of the slurry pump delivery fluid Often where the solid particles are larger
The harmfulness of the liquid is relatively severe,These substances are more common than the ordinary liquid on the shaft and seal corrosion and wear are more serious.
Once the seal fails, there will be a leak Directly affect the normal operation of the pump and pump efficiency Slurry pump seal in the form of two main:
1. Packing seal
The added filler is in full contact with the shaft To prevent the transmission medium through, so as to achieve the purpose of sealing,This type of seal may cause corrosion of the filler when transporting corrosive material So the drawbacks of this form of sealing is not able to transport toxic, corrosive liquids.
2. Mechanical seal
Mechanical seal is the dynamic ring and static ring by spring in close contact with the axial to achieve the purpose of sealing Mechanical seal is reliable, almost no leakage,But in the installation should pay attention to protect the friction surface,Avoid wear,The seal is mainly used for conveying flammable and explosive, high temperature and high pressure, strong corrosion of the liquid.
The company has always adhered to the corporate philosophy of "survive by quality, develop by reputation, market-oriented, and benefit from management". It has won scientific management, advanced equipment, strict process and strong dedication. The trust and praise of the majority of users.we are vertical sump slurry pump supplies,we can guarantee quality.
Main Specifications: Size: 1-30 inches Capacity: 25-13860 m3/h Head: 5-60m,we are LAP low abrisive slurry pump manufacturer,we can guarantee quality. Material: Hi-chromium metal liner, or Rubber liner Seal: Packing seal, Expeller seal
Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.
Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;
Working Applications: Series HHD slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump. Designed for handling strong abrasive and high concentration slurries, HHD series slurry pumps are cantilevered heavy duty slurry pumps with metal liner. With thick wear parts and heavy-duty support, HHD series could run in series in the allowable range of pump working pressure.
1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;
Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal
Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.
Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.
注: 建议图片大小150px*50px
