The slurry pump is mainly used as an environmental protection, new building materials, coal washing and other industries. It can transport medium containing relatively small concentrations of solid particles. The above slurry pump manufacturer tells everyone how to discharge oil from the slurry pump.
1.If you want to drain all the oil in the slurry pump box, you can unscrew the oil drain plug on the upper part of the tank and drain the oil.
2.Under the condition that the slurry pump is drained outside, the liquid level is less than 30 mm from the highest point of the top plate of the tank, so as to ensure the lubrication and cooling of the bearings in the pump. If the working volume of the jack is too large, it needs A fuel tank is also provided to ensure that the highest point of the liquid level after the oil is discharged is never more than 100 mm to prevent suction.
3.After the speed-adjusting slurry pump is driven for 500h for the first time, the oil should be changed and the fuel tank and oil filter should be cleaned. The oil quality should be tested by visual inspection and laboratory test. If the oil quality is improved, the oil should be changed immediately. In addition to the fuel tank and oil filter, if there is metal scrap or water in the oil, the cause should be retrieved and the fault should be discharged.
4.In the long time after the liquid level is reduced, the bearing is oiled by the oil and the plunger bearing fails to be lubricated. The oil tank oil filter and the oil filter under the pump are made of 230 mesh/inch copper wire mesh. The net should be cleaned up to avoid obstruction. When using, the oil temperature of the fuel tank should never be less than 60 °C, and appropriate measures should be taken to heat it when appropriate.
We have a high-quality marketing team that unites and cooperates and develops with courage. We operate with excellent service, flexible and effective way, adhering to the business philosophy of "survive by strength, develop by reputation", with "integrity management, mutual benefit and common development". "As a principle, we are willing to provide more excellent and more professional services for the new and old customers, and create a better tomorrow. Welcome customers to come and negotiate business!we are China slurry pump manufacturer,we can guarantee quality.
Main Specifications: Size: 1-30 inches Capacity: 25-13860 m3/h Head: 5-60m,we are LAP low abrisive slurry pump manufacturer,we can guarantee quality. Material: Hi-chromium metal liner, or Rubber liner Seal: Packing seal, Expeller seal
Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.
Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;
Working Applications: Series HHD slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump. Designed for handling strong abrasive and high concentration slurries, HHD series slurry pumps are cantilevered heavy duty slurry pumps with metal liner. With thick wear parts and heavy-duty support, HHD series could run in series in the allowable range of pump working pressure.
1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;
Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal
Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.
Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.
注: 建议图片大小150px*50px
