(1)They are designed for transferring the highly abrasive or corrosive slurry
(2)They are popular in many kinds of mining,metallurgical,and other industry.
(3)The pumps can be driven by electric motor, diesel engine or hydraulic power.
(4)The discharge of pump can be in eight positions to suit installations and applications.
(5)The shaft seals can be adoptable of gland seal or expeller seal, or mechanical seal.
Structural features
★A large diameter with a short overhang ensure the rigidity of shaft, suitable for high power condition.
★Hardened stainless steel shaft sleeve with ‘O’ ring seals at both ends. A slip fit allows the sleeve protects the shaft from the wear and corrosion.
★The deputy vanes in both former and rear cover of Impeller relieve seal pressure and minimize recirculation.
★Casing is made of ductile iron, ribs help casing to stand high pressure.
★The wet parts are made of high-chrom alloy or rubber, having the abrasion-resist, corrosion-resist and impact erosion-resist properties, improved the service life of pump.
★The wet parts are made of metal or rubber are interchangeable or mixed use, suited different working condition.
★Impeller adopt the method of wide flow and vane concave to improve flow and corrosion resistance, prolong service life.
★The shaft seal may be adoptable of packing
seal,expeller seal and mechanical seal to fit different working conditions.
★The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
★The bearing Assembly have the grease lubrication and oli lubrication are optional depend on the usage.
★Adopted the oil lubrication bearing assembly can effectively lower the high operating temperature and reduce bearing fault
★The grease lubrication bearing assembly easy installation and adjustment, simple structure and easy to maintain and perform reliably.
Main Specifications: Size: 1-30 inches Capacity: 25-13860 m3/h Head: 5-60m,we are LAP low abrisive slurry pump manufacturer,we can guarantee quality. Material: Hi-chromium metal liner, or Rubber liner Seal: Packing seal, Expeller seal
Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.
Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;
Working Applications: Series HHD slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump. Designed for handling strong abrasive and high concentration slurries, HHD series slurry pumps are cantilevered heavy duty slurry pumps with metal liner. With thick wear parts and heavy-duty support, HHD series could run in series in the allowable range of pump working pressure.
1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;
Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal
Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.
Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.
注: 建议图片大小150px*50px
