Features: 1. This sump pump is with single pump casing, vertical cantilever designed; 2. To use double suction and open type impeller design, and the impeller could be high chrome alloy of rubber lined material;we are vertical sump slurry pump supplies,we can guarantee quality. 3. The bearing is used grease lubrication; 4. The clearance between the impeller and frame plate could be adjusted, to make sure our pump run in its highest efficient; 5. No need any shaft seals; 6. The pumps could be direct coupling drive or with belt drive by motor;

Applications: Series HAP slurry pumps are widely used in the mining, coal washing plant, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydro cyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.

Cost Advantage: (1) The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs. (2) The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extending the using life. (3) Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.

Main Specifications: Size: 65mm-300mm Capacity: 50-1800 m3/h Head: 50-90m Material: Hi-chromium metal liner, or Rubber liner Seal: Expeller seal combined with packing and Mechanical seal

The pipe inner diameter range is from 500 to 1000mm with single pipe length of 6000mm, by flange connected. With long years updating in the technology and research trial, our produced high wear resisting cast steel composite dredging pipe, takes the highly wear-resisting cast steel of the inner pipe, compounded with the common steel plate, which is with the equal weight as the material of steel material pipe of the same specification.

The exterior of rubber float possessed the same performance of the rubber tyres while the interior is filled with macromolecule foam. Used as the float of offshore discharging pipeline, it owns the advantages in terms of buoyancy, impact-resistance, aging-resistance and cold-resistance and boasts a good substitution of traditional steel float and polythene float.

This full armored rubber hose is mainly used for dredging projects and mine tailings transportation. This steel ring type armored tube could be working longer time when conveying solid with acute angles and also guarantee the pipe with a bent over at least 30 degree. The inner diameter range of the pipe could be 600 to 1000mm. The pipe and pipe are connected by flanges and the single pipe length and working pressure could be manufactured according to the user’s requirement.

Shaft Seal: 1. Gland seal: There are two kinds of design: standards and high-temperature. The high temperature type should be used when the temperature is higher than 90℃. The stuffing box of this type can be cooled in order to be suitable for the transporting duty in high temperature. 2. Mechanical seal: It should be used for the application where leakage is not allowed. Rotating Direction: The rotating direction of the pump is clockwise as viewed from the end of drive.

The wet pump parts of impeller, front liner, rear liner is made of special high chrome alloy, with the hardness not less than 58HRC, while the pump casing material selection, takes into account the pressure requirements, to use of wear-resistant cast steel, with a hardness about 48HRC. And also depending on the different dredging application, we use different material to meet the requirements of the customer.

Our GP series gravel pumps could be wholly exchangeable with G&GH series gravel Warman pump. The GP pump is single-stage single-suction cantilever-type centrifugal pump, and adopts a single pump shell structure connected by clamps, with the advantage of light weight, good cavitation performance, strong corrosion resistance, wide flow channel, easy to install and maintenance etc. gravel pump applications to various fields

Pump Features: 1. Series of TL(R) FGD pump is a single-stage ,single-suction ,horizontal centrifugal pump .This series pump is matched by tight structure X bracket. It mainly used as the circulating pump for absorbent tower in FGD appliances. It has such features: wide rang flowing capacity ,with high efficiency, high saving power. 2. Bearing lubricating way: diluted oil 3. This kind of pump adopts back pull-out structure keeping it easy construction and easy maintenance. It does not need disassemble inlet & outlet pipeline.

1. Supplying the Exchangeable Pump Parts With the Warman Series Pumps 1) HAP series pump Volute liners, impellers, and suction liners under heat treatment; 2) Pump volute liners & impellers under machining work; 3) Pump parts under casting; 4) The Vanishing mold casting technology is adopting;